Browse repository
Stratigraphic unit type
1-10 of 12 results
 1  / 2 
    Previous / Next    
ID  2184  -  Public access
Description :   UE193. Cut of slightly oval shape in plan, of 19 x 16 cm (axis NE-SW x NW-SE) and 8 cm in depth, giving it a light NE-SW orientation. The walls fall inwards at an angle of about 90º. The base is circular in plan, 15 cm in diameter, flat, and has no orientation. The mouth-wall and wall-base ruptures form an angle of almost 90º, giving the hole the appearance of a cylinder. It was excavated in UE163 and contains UE170.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2186  -  Public access
Description :   UE194. Cut of circular shape in plan, approximately 20 cm in diameter and 11 cm in depth. The walls fall inwards at an angle of about 135º until they reach the base. This is slightly oval, 7 x 4 cm (NE-SW x NW-SE), and concave. All this makes the hole look like an inverted cone. It was excavated in UE163 and contains UE171.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2188  -  Public access
Description :   UE184. Cut of circular shape in plan, approximately 17 cm in diameter and 12 cm in depth. The walls fall inwards at an angle of about 100º until they reach the base. The base is circular, 4 cm in diameter and concave, located towards the SE, which gives the hole a slight NE-SW orientation. The wall-base rupture is progressive. It was excavated in UE163 and contains unit UE172.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2190  -  Public access
Description :   UE185. Cut of oval shape in plan, approximately 20 x 16 cm (NW-SE x NE-SW), and 14 cm deep. The walls fall inwards at an angle of about 100º until they reach the base. This is oval, 8 x 6 cm (N x S) and concave, located towards the S, which gives the hole a slight N-S orientation. The wall-base rupture is progressive. It was excavated in UE163 and contains UE173.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2192  -  Public access
Description :   UE186. Cut of semicircular shape in plan that seems to insert under the E profile of T1. The visible surface protrudes 14 cm from the profile and is 8 cm deep. The walls fall inwards at an angle of about 140º until they reach the concave base. The base, which is not completely defined, is also semicircular, and has smooth wall-base breaks. No orientation can be seen due to the fact that it is partially excavated. It was excavated in UE163 and contains UE174.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2194  -  Public access
Description :   UE187. Cut of circular shape in plan, approximately 14 cm in diameter and 10 cm in depth. The walls fall inwards at an angle of about 100º until they reach the base. This is circular, 4 cm in diameter, slightly inclined towards the SE, and concave. It was excavated in UE163 and contains unit UE175.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2196  -  Public access
Description :   UE188. Cut of circular shape in plan, approximately 15 cm in diameter and 10 cm in depth. At the S end, the walls fall inwards at an angle of about 100º until they reach the base; at the N end, the fall is less pronounced (about 135º). The circular base, 5 cm in diameter, is closer to the S, which gives the hole a certain N-S inclination. The wall-base rupture is more abrupt in the southern zone than the N, which is more progressive. It was excavated in UE163 and contains unit UE176.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2198  -  Public access
Description :   UE189. Cut of oval shape in plan, approximately 14 x 12 cm (NE-SW x NW-SE) and 10 in depth. The walls fall inwards at an angle of about 135º until they reach the base, oval, 6 x 3 cm (NW-SE x NE-SW), and concave. All this makes the hole look like an inverted cone. It was excavated in UE163 and contains unit UE177.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2200  -  Public access
Description :   UE190. Cut of circular shape in plan, approximately 12 cm in diameter and a maximum depth of 14 cm. The walls fall inwards at an angle slightly greater than 90º until they reach the bottom. The circular base, 6 cm in diameter, is concave and the ruptures with respect to the walls are relatively smooth. It has no orientation or inclination. It was excavated in UE163 and contains UE178.
Stratigraphic unit type:  Cut, post hole
[See more]
ID  2202  -  Public access
Description :   UE191. Cut of circular shape in plan, approximately 12 cm in diameter and a maximum depth of 10 cm. The walls fall inwards at an angle slightly greater than 90º until they reach the bottom. The base, circular 5 cm in diameter, is concave and the ruptures with respect to the walls are relatively smooth. It has no orientation or inclination. It was excavated in UE163 and contains UE179.
Stratigraphic unit type:  Cut, post hole
[See more]
1-10 of 12 results  
 1  / 2 
    Previous / Next    
"Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0. International license."